What This Calculator Covers
This calculator prices three different jobs: building a new outdoor court, converting a tennis court, and resurfacing a court you already have. Pick a mode, set your options, and the estimate updates line by line.
Every unit price here is a published US figure read in November 2026 from national cost guides, court builders and fence installers. The sources and their dates sit under the breakdown table below.
Treat the result as a planning estimate, not a quote. Prices vary by region, site condition and contractor, and local bids can land well outside national ranges.
New-court estimates assume a 30 × 60 ft pad per court — 1,800 sq ft, USA Pickleball’s minimum total playing surface.
One tennis slab (60 × 120 ft) holds 2 pickleball courts comfortably or 4 with tight spacing. Slab work is priced per tennis court; only nets and lines scale with the pickleball court count.
The basic recoat covers crack and low-spot repair, one resurfacer coat, two color coats and new lines on an existing 30 × 60 ft court.
The Three Numbers To Know
Published totals for one new outdoor court cluster into three bands. A basic professional build starts at $10,000–$18,000, with minimal prep and no fence or lights.
The national average sits near $34,000, published independently by HomeGuide and Angi in 2026. Most finished backyard and club courts land between $20,000 and $50,000.
Premium builds reach $55,000–$100,000 or more. Post-tension concrete, cushioned surfacing, fencing and LED lighting stack up fast, and public projects bid higher still.
How These Prices Break Down
| Component | Published Range | Unit |
|---|---|---|
| Site prep and grading | $2,000–$10,000 | Per project |
| Asphalt base | $3–$7 | Per sq ft installed |
| Reinforced concrete base | $5–$10 | Per sq ft installed |
| Post-tension concrete base | $10–$15 | Per sq ft installed |
| Acrylic surfacing | $0.50–$1.00 | Per sq ft installed |
| Cushioned surfacing system | $2–$4 | Per sq ft installed |
| Line painting | $200–$600 | Per court |
| Portable net set | $100–$500 | Per court |
| Permanent net system | $300–$1,500 | Per court |
| Chain-link fencing, 10 ft | $17.85–$28.25 | Per linear ft installed |
| LED lighting, 2-pole system | $4,000–$8,000 | Per court |
| LED lighting, 4-pole system | $10,000–$15,000 | Per court |
| Permits | $200–$2,000 | Per project |
| Tennis conversion, permanent | $5,000–$20,000 | Per tennis court |
| Resurfacing, recoat package | $1,500–$3,500 | Per court |
| Resurfacing, with crack repair | $8,000–$15,000 | Per court |
Unit prices read November 2026 from HomeGuide (updated January 6, 2026), Angi (updated October 28, 2026), CalcWolf (updated January 4, 2026), PickleTile (reviewed July 31, 2026) and Fixr’s chain-link fence guide (updated January 31, 2025).
What Drives The Price Up
The base. Post-tension concrete runs $10–$15 per sq ft against $3–$7 for asphalt, and that premium grows with every extra foot of pad.
The surface. A cushioned system costs $2–$4 per sq ft, roughly four times standard acrylic color coats at $0.50–$1.00 per sq ft.
Lights and fencing. A 4-pole LED system adds $10,000–$15,000 per court, and commercial fencing with windscreens can reach $5,000–$20,000 per court.
The site. Clearing, drainage and heavy grading sit inside the $2,000–$10,000 prep band, and poor soil or a sloped lot pushes past it.
The region. One Washington builder quotes $37,000–$54,000 before fence and lights, and two recent city projects bid about $58,600 and $106,800 per court.
The contractor. A general contractor typically adds 10–20% on top of project cost, before amenities like benches, shade and storage.
Keep Reading
Planning a build? Start with the official playing dimensions in our guide to pickleball court size, including the runoff space a safe court needs around the lines.
Still deciding whether to build at all? Browse our Find a Court guides to see what already exists near you, state by state.
For a sense of what finished facilities look like at scale, see our guide to pickleball courts in Texas, from backyard builds to 30-court clubs.
Frequently Asked Questions
How much does it cost to build a pickleball court?
Published 2026 figures put a basic professional build at $10,000–$18,000 and the national average near $34,000. Premium builds with post-tension concrete, cushioned surfacing, fencing and lights reach $55,000–$100,000 or more.
How much does it cost to convert a tennis court into pickleball courts?
A temporary setup with tape lines and portable nets runs about $200–$1,000 per tennis court. A permanent conversion is published at $5,000–$20,000, while full resurfacing bids alone have reached $15,895–$22,000.
How much does it cost to resurface a pickleball court?
A standard recoat package — crack repair, a resurfacer coat, two color coats and new lines — runs $1,500–$3,500 per court. Recoats with serious crack repair reach $8,000–$15,000.
How often does a pickleball court need resurfacing?
Acrylic surfaces typically need resurfacing every 4–8 years, depending on climate, use and crack movement. Budget $300–$1,000 per court per year for routine maintenance between recoats.
What size pad do these estimates assume?
The calculator prices a 30 × 60 ft pad, 1,800 sq ft — USA Pickleball’s minimum total playing surface. The recommended new-build pad is 34 × 64 ft, which raises base and surfacing costs.
Why do quotes for the same court vary so much?
Scope is the main reason: one quote may cover color coats only, another a full multi-coat system. Base material, site condition and region move prices further, so compare itemized bids, not totals.